Aastra Telecom 480I CT manual Programmable Key Settings for 9112i

IP Phone Administrator Guide Softkey/Programmable Key Parameters

Appendix A

Programmable Key Settings for 9112i and 9133i

The value of "N" for the following parameters is dependent on the number of programmable keys available on the 9112i/9133i models. See the table on page 93 for the applicable values.

Parameter –	Aastra Web UI	Operation->Programmable Keys
prgkeyN type	Configuration Files	aastra.cfg, <mac>.cfg
Type
(in Web UI)
Description	The type of programmable key to configure. Valid types are:
	• line (9133i only) - Indicates softkey is configured for line use.
	• speeddial - Indicates programmable key is configured for speeddial
	use
	• dnd - Indicates programmable key is configured for do not disturb
	on the phone. This option is "do not disturb" in the Aastra Web UI).
	• blf (9133i only) - Indicates programmable key is configured for Busy
	Lamp Field (BLF) use. User can dial out on a BLF configured key.
	• list (9133i only; Aastra Web UI only) - Indicates programmable key
	is configured for BLF list use. User can dial out on a BLF List
	configured key.
	• xml - Indicates programmable key is configured to accept an XML
	application for accessing customized XML services. You can also
	specify an XML softkey URL for this option.
	• flash - Indicates programmable key is set to generate a flash event
	when it is pressed on the 9112i and 9133i.
	• The IP phone generates flash events only when a call is connected
	and there is an active RTP stream (for example, when the call is not
	on hold).
	• spre - Indicates programmable key is configured to automatically
	activate specific services offered by the server. For example, if the
	spre value of *82 is configured, then by pressing the softkey, *82
	automatically activates a service provided by the server.
	• park - Indicates programmable key is configured to park incoming
	calls when pressed.
	• pickup - Indicates programmable key is configured to pick up
	parked calls when pressed.
	• lcr - Indicates programmable key is configured for “last call return”
	when pressed.
Format	Text
Default Value	Not Applicable

A-100 41-001129-00 Rev 09, Release 1.4.1