Aastra Telecom 480I CT manual Call Forwarding

Operational Features

Operational Features

Call Forwarding

The call forwarding feature on the IP phone allows incoming calls to be forwarded to another destination. The phone sends the SIP message to the SIP proxy, which then forwards the call to the assigned destination.

Call forwarding is disabled by default. You can configure call forwarding on a phone-wide basis or on multi-line phones (480i/480i CT/9133i), on a per-line basis. If you have configured call forwarding on an individual line, then the settings for this line are used; otherwise, the phone-wide call forward settings are used.

You can configure call forwarding on all phones (global settings) or on specific lines (local settings) of a single phone.

For call forwarding you can set the following:

•Call forward mode

•Destination number

•Number of rings before forwarding the call (from 1 to 9 rings)

The following are the call forward modes you can set:

Call Forward Mode	Description
Off	Disables call forward
All	Phone forwards all incoming calls
	immediately to the specified destination.
Busy	Phone forwards incoming calls if the line is
	already in use.
No Answer	Phone forwards the call if it is not
	answered in the specified number of rings
Busy No Answer	Phone forwards the call if either the line is
	already in use or the call is not answered
	in the specified number of rings.
Global	Phone uses the phone-wide call forward
(per-lline only)	setting. This is only valid when setting the
	mode of individual lines.

Operational Features

41-001129-00 Rev 09, Release 1.4.1 5-63