Aastra Telecom 480I CT manual Configuration File Precedence, Configuration Methods

Overview

Firmware and Configuration Files

Configuration File Precedence

Aastra IP phones can accept two sources of configuration data:

•The server configuration most recently downloaded/cached from the configuration server files, aastra.cfg/<mac>.cfg (or the aastra.tuz/<mac>.tuz encrypted equivalents).

•Local configuration changes stored on the phone that were entered using either the IP phone UI or the Aastra Web UI

In the event of conflicting values set by the different methods, values are applied in the following sequence:

1.Default values hard-coded in the phone software

2.Values downloaded from the configuration server

3.Values stored locally on the phone

The last values to be applied to the phone configuration are the values that take effect.

For example, if a parameter’s value is set in the local configuration (via Aastra Web UI or IP phone UI) and the same value was also set differently in one of the <mac>.cfg/aastra.cfg files on the configuration server, the local configuration value is the value that takes effect because that is the last value applied to the configuration.

Configuration Methods

You can use the following to setup and configure the IP phone:

•IP phone UI

•Aastra Web UI

•Configuration files

Models 480i and 480i CT have 20 softkeys available to configure the IP phone. Model 9133i has 7 programmable keys. Model 9112i has 2 programmable keys.

Overview

41-001129-00 Rev 09, Release 1.4.1 1-7