Aastra Telecom 480I CT manual Configuration Example, Softkey Idle Connected

Operational Features

Operational Features

Configuration Example

The following example illustrates the use of the "softkeyN states" parameter, and the "softkeyN type" parameter with a value of empty. For clarity purposes, only the "softkeyN type" and "softkeyNstates" parameters are shown.

softkey1 type: line

softkey1 states: idle connected

softkey3 type: dnd

softkey3 states: idle

softkey4 type: line

softkey5 type: empty

softkey5 states: connected

softkey6 type: speeddial

softkey6 states: connected

The following table shows how the keys in the example above would display on the IP Phone UI.

Note: The "empty" key type allows a softkey to be removed quickly by deleting the softkey information from the configuration file.

Operational Features

Softkey	Idle	Connected	Notes
softkey1	Key 1	Key 2	Line displays for softkey1.
			Key 1 in connected state is the Drop key. Idle
			and connected display as applicable.
softkey2	(not used)	(not used)	Softkey2 is not displayed.
softkey3	Key 2	(not used)	DND displays for softkey3. Idle displays as
			applicable.
softkey4	Key 3	Key 3	Line displays for softkey4. Default state
			values (idle, connected, incoming, outgoing)
			display as applicable.
softkey5	(not used)	Key 4 (blank)	A blank displays for softkey5. Connected
			displays as applicable.
softkey6	(not used)	Key 5	Speeddial displays for softkey6. Connected
			displays as applicable.

Softkeys and programmable keys are configurable using the Aastra Web UI or the configuration files.

41-001129-00 Rev 09, Release 1.4.1 5-15