Aastra Telecom 480I Single Call Restriction 480i CT only, Configuring Single Call Restriction

Advanced Operational Features

Advanced Operational Features

Single Call Restriction (480i CT only)

On the 480i CT, an administrator can enable or disable a single call restriction between the 480i CT base unit and a call server.

When this feature is enabled (set to 1), you can make separate active calls from the 480i CT base unit and from the cordless handset. If this feature is disabled (set to 0), only one call can be active at a time either from the base unit or from the handset. When this feature is disabled, and you make an active call on either the base unit or the handset, any other attempt to make an active call is put on hold. Also, when this feature is disabled, more than one call can negotiate complex audio codecs since only a single call is decoding audio at a time.

You can configure this feature via the configuration files or the Aastra Web UI.

Configuring Single Call Restriction.

Configuration Files

For the specific parameters you can set in the configuration files for single call restriction on the 480i CT, see Appendix A, the section, “Single Call Restriction” on page A-106.

Advanced Operational Features

41-001129-00 Rev 09, Release 1.4.1 6-9