Aastra Telecom 480I CT manual Hard Keys, Enabling/Disabling Redial, Xfer, and Conf Keys

Operational Features

Operational Features

Hard Keys

There are hard keys on your phone, such as Hold, Redial, Xfer, Icom and Conf (Hold and Icom not available on the 9112i and 9133i) that are configured for specific call-handling features. (See the product-specific User Guide for more information about the hard key functions).

Enabling/Disabling Redial, Xfer, and Conf Keys

You can enable or disable the Redial, Xfer, and Conf hard keys as required using the following parameters in the configuration files:

•redial disabled

•conference disabled

•call transfer disabled

Valid values for this parameter are 0 (enabled) and 1 (disabled).

If this parameter is set to 1, the key is not active and is ignored if pressed by the user. For "redial disabled" the value of 1 does not save the dialed number to the "Redial List".

If this parameter is set to 0, the key is active and can be pressed by the user.

This feature is configurable via the configuration files only.

Use the following procedure to enable/disable the Redial, Xfer, and Conf keys.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Hard Key Parameters” on page A-90..

Operational Features

41-001129-00 Rev 09, Release 1.4.1 5-9