Aastra Telecom 480I CT manual Softkey Settings for 480i and 480i CT, Parameter Aastra Web UI

IP Phone Administrator Guide Softkey/Programmable Key Parameters

Appendix A

Softkey Settings for 480i and 480i CT

The value of "N" for the following parameters is dependent on the number of softkeys available on the 480i/480i CT models. See the table above for applicable values.

Parameter –	Aastra Web UI	Operation->Softkeys and XML
softkeyN type	Configuration Files	aastra.cfg, <mac>.cfg
Type
(in Web UI)
Description	The type of softkey to configure. Valid types are:
	• line - Indicates softkey is configured for line use.
	• speeddial - Indicates softkey is configured for speeddial use.
	• dnd - Indicates softkey is configured for do not disturb on the phone.
	This option is "do not disturb" in the Aastra Web UI).
	• blf - Indicates softkey is configured for Busy Lamp Field (BLF) use.
	User can dial out on a BLF configured key.
	• list - Indicates softkey is configured for BLF list use. (This option is
	BLF\List in the Aastra Web UI). User can dial out on a BLF List
	configured key.
	• xml - Indicates the softkey is configured to accept an XML application
	for accessing customized XML services. You can also specify an XML
	softkey URL for this option.
	• flash - Indicates the softkey is set to generate a flash event when it is
	pressed on the 480i and 480i CT, or a feature key is pressed on the
	480i CT handset.
	• The IP phone generates flash events only when a call is connected
	and there is an active RTP stream (for example, when the call is not
	on hold).
	• spre - Indicates the softkey is configured to automatically activate
	specific services offered by the server. For example, if the spre value
	of *82 is configured, then by pressing the softkey, *82 automatically
	activates a service provided by the server.
	• park - Indicates the softkey is configured to park incoming calls when
	pressed.
	• pickup - Indicates the softkey is configured to pick up parked calls
	when pressed.
	• empty - Indicates the softkey is configured to force a blank entry on
	the IP phone display for a specific softkey. The soft keys are added in
	order (from softkey1 to softkey20) after any hard-coded keys have
	been added. If a particular soft key is not defined, it is ignored.
	• lcr - Indicates the softkey is configured for “last call return” when
	pressed.
Format	Text

A-94 41-001129-00 Rev 09, Release 1.4.1