Aastra Telecom 480I CT manual BLF Subscription Period 480i/480i CT/9133i

Operational Features

Operational Features

BLF Subscription Period (480i/480i CT/9133i)

On the IP phones, you can set the time period, in seconds, that the IP phone resubscribes the BLF subscription service after a software/firmware upgrade or after a reboot of the IP phone.

In the configuration files, you enter the following parameter with a valid value to set the BLF subscription period:

sip blf subscription period: <value in seconds>

The minimum value for this 120 seconds (2 minutes). The default is 3600 (1 hour).

Setting this parameter to a value lower than 3600 allows the configured BLF feature to become active more quickly after a software/firmware upgrade or after a reboot of the IP phone. If you enter a value lower than 120 for this parameter, the default value (3600) will be used by the IP phone.

You can configure this feature using the configuration files or the Aastra Web UI.

Configuring BLF Subscription Period

Use the following procedures to configure the BLF subscription period on the IP phone.

.

Configuration Files

To configure the BLF subscription period on the IP phones using the configuration files, see Appendix A, the section, “BLF Subscription Period Settings” on page A-89.

Operational Features

41-001129-00 Rev 09, Release 1.4.1 5-35