IP Phone Administrator Guide Configuration Server Protocol

Configuring the IP Phones

Configuration Server Protocol

You can download new versions of firmware and confguration files from the configuration server to the IP phone using any of the following types of protocols: TFTP, FTP, HTTP. The TFTP setting is the default download protocol. You can configure the type of protocol that the IP phone uses by setting it in the configuration files, the IP phone UI, or the Aastra Web UI.

Note: For DHCP to automatically populate the IP address or domain name for the TFTP server, your DHCP server must support Option 66. For more information, see this chapter, the section, “DHCP” on page 4-4.

Configuring the Configuration Server Protocol

Use the following procedure to configure the configuration server protocol.

Configuration Files

For specific parameters you can set in the configuration files, see Appendix A, the section, “Configuration Server Settings” on page A-10.

IP Phone UI

Step Action

1For 9112i/9133i:

Press Ion the phone to enter the Options List.

For 480i/480i CT:

Press %on the phone to enter the Options List.

2For 9112i/9133i:

Select Network Settings.

For 480i/480i CT: Select Network.

4-10

41-001129-00 Rev 09, Release 1.4.1

Page 66
Image 66
Aastra Telecom 480I CT manual Configuring the Configuration Server Protocol