Configuring the SIP Local Dial Plan

IP Phone Administrator Guide

Operational Features

Use the following procedures to configure the SIP Local Dial Plan using the configuration files or the Aastra Web UI.

For specific parameters you can set in the configuration files, see Appendix A, the section, “SIP Local Dial Plan Settings” on page A-32.

1Click on Basic Settings->Preferences.

2	In the "Local Dial Plan" field, enter a valid local dial plan (up to 127 alphanumeric characters) for the
	IP phone. Default is X+#XX+*. Enter prepended digits as required.
3	Enable the "Send Dial Plan Terminator" field by checking the check box. (Disable this field by
	unchecking the box). Default is disabled.
4	In the "Digit Timeout (in seconds)" field, enter a timeout value. This is the length of time the phone
	waits before dialing. Default is 4 seconds.
5	Click	to save your changes.
	You must restart your IP phone for the changes to take affect.

5-110

41-001129-00 Rev 09, Release 1.4.1