Agilent Technologies 660MHz manual VOLT12, Agilent 81131A 0.10 Vpp to 3.80 Vpp, Execute

				Programming Reference
				SCPI Instrument Command List
Command	:VOLT[12]
Long	[:SOURce]:VOLTage[12][:LEVel][:IMMediate][:AMPLitude]
Form	Set & Query
Parameter	Numeric
Parameter suffix	V with engineering prefixes.
*RST value	1.00 V
Specified Limits	Agilent 81131A: 0.10 Vpp to 3.80 Vpp
	Agilent 81132A: 0.10 Vpp to 2.50 Vpp
Value coupling			Amplitude
	High = Offset +
			2
	Low = Offset –		Amplitude
			2
Range coupling	Offset
Description	This command programs the amplitude voltage of the OUTPUT signal.
	Note that to set the OUTPUT levels in terms of voltage, you first have to
	execute the	[:SOURce]:HOLD VOLTage command to enable the
	[:SOURce]:VOLTage subsystem.
	The available voltage range is limited by the specified current limits.
Example	:HOLD VOLT		Enable VOLTAGE subsystem
	:VOLT1 2V		Set OUTPUT 1 amplitude to 2 V

Command	:VOLT[12]:OFFSet
Long	[:SOURce]:VOLTage[12][:LEVel][:IMMediate]:OFFSet
Form	Set & Query
Parameter	Numeric
Parameter suffix	V with engineering prefixes.
*RST value	0.0 mV

77