| Troubleshooting |
| Symptom Charts/Video - 14 |
Backlight doesn’t | 1 | Adjust screen brightness setting. | |
operate | 2 | Verify that backlight cable connection is secure. | |
|
| 3 | Check display cable, inverter board, and I/O logic board |
|
| 4 | connections. |
|
| Verify that inverter cable is properly connected and that | |
|
| 5 | cable is good. |
|
| Verify that cables are not pinched or severed. | |
|
| 6 | Replace inverter board (international only). |
|
| 7 | Replace display (international only). |
|
| 8 | Replace I/O logic board. |
13.3” screen flickers | Carefully squeeze the upper left side of the display bezel. If the | ||
or shows intermittent | problem disappears, dispatch unit for display cable replacement | ||
vertical lines | (13.3” displays only). Do not replace I/O logic board or display. | ||
