Hot Issues | Overview - 2 | |
|
|
|
PowerBook G3 Series: Identifying PowerBook
G3 Series Circuit Boards
Discussion: When replacing PowerBook G3 Series circuit boards it is very important to check the ID codes to verify that you are ordering the correct part.
The ID codes listed below can be found within the serial numbers that are attached to the circuit boards. They are not part of the whole unit serial number that is attached to the bottom of the PowerBook.
These serial numbers can be located in the following locations.
• Microprocessor Board: Follow the instructions in Service Source for removing the microprocessor card. With the card removed, look at the serial number/bar code label on the SODIMM conector on the bottom side of the card.
