Additional Procedures

I/O Wall EMI Shield Replacement - 6

 

 

 

I/O Wall EMI Shield Replacement

If the copper EMI shield on either side of the I/O wall is torn, it must be replaced. Follow the procedures in this section to replace the I/O wall EMI shields.

Replacement Caution: No part of the EMI shield should extend past the area it is covering. If the EMI shield is not properly fitted, an electrical short could occur. Ensure that you press down firmly on the EMI shield tape and that there are no air pockets or loose edges.

Page 218
Image 218
Apple M4753 manual Wall EMI Shield Replacement