Navigation

Starting navigation

Once you enter a destination, navigation begins automatically.

If you want to begin a navigation session to the navigation system’s last destina- tion,

1select the ROUTE GUIDANCE menu item in the main navigation menu.

2Confirm your selection by pressing the OK button 8.

TIP: You can also begin navigation using the macro button.

The navigation session display appears. The route is calculated. This can take several seconds depending on the distance to the destination. When the navigation session display appears you will hear the voice out- put: “The route is being calculated”. You will then hear the first navigation voice output when the calculation is complete.

The name of the road that you are currently driving down and the name of the road that the system suggests you should turn off into are dis- played in the title line of the navigation session display.

If you leave the road network covered by the navigation CD, OFF ROAD will be displayed in the title line.

The visual driving recommendations appear in the symbol area on left half of the display.

TIP: You can choose between a 2D and 3D display for the driving recom- mendations. To switch between the display modes, keep the OK button

8pressed until the display changes.

The approach bar appears in the centre of the display. It is a graphical representation of the distance to the decision point. On a longer stretch of road, the remaining distance to drive to the next decision point is dis- played.

NAVIGATION

ROUTE GUIDANCE

DEST. ENTRY

DEST. MEMORY

TOURLIST

MERIANscout

SCHLOSSWEND…

03h58

461 mi

Europe 1

Navigation session display, 2D display

ENGLISH

33

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

CD CHANGER

SETUP

INDEX

Page 33
Image 33
Blaupunkt DX-R70 operating instructions Route Guidance, DEST. Entry DEST. Memory Tourlist, Starting navigation