INTRODUCTION | NAVIGATION | RADIO MODE | CD MODE | CD CHANGER | SETUP | INDEX |
50
Defining route options
You can customise the route to suit your requirements at any time, even during an active navigation session.
The configurable parameters are:
- ROUTE: Choose between the quickest or shortest route or dynamic nav- igation with TMC. If you select DYN., the options listed below will be hidden from view; the TravelPilot calculates the quickest route whilst tak- ing into account the current traffic messages and automatically tunes into a TMC station.
-MOTORWAY: You can set whether you want to use motorways during your navigation session.
-FERRY: You can set the system to be able to use ferries or avoid them.
-TOLL: You have the option of excluding or including roads for which a toll charge is levied in your navigation sessions.
Note: If, for instance, MOTORWAY AVOID is set, and a very long de- tour would be the result of applying this option, the TravelPilot will instead decide to include motorways in its route calculations. The same applies to ferries and toll roads.
To define the route options,
1press the MENU button :.
✔The navigation session’s navi menu appears.
2Open the ROUTE OPTION menu item.
TIP: You can also open the route options menu using the macro button.
✔The selection menu for the route options opens.
3Select the menu item you want to change and
4press the OK button 8.
NAVI. MENU |
MODIFY ROUTE
TRAFFIC AHEAD
ROUTE OPTION
ROUTE LIST
POSITION MARK
ROUTE OPTION |
ROUTE FAST MOTORWAY WITH
FERRY WITH
TOLL WITH CONTINUE
ROUTE OPTION |
