4. ASSEMBLY
Provisionally tighten this screw, and then fully tighten it after installing the belt cover.
3444Q
1)Insert horizontally from the front so that the
2)Loosen the four screws and make fine adjustments to the height of the needle plate auxiliary plate so that it is at the same height as the needle plate.
1.Auxiliary plate supports [4 pcs]
2.Screws [4 pcs]
3.Needle plate auxiliary plate
4.Screws [4 pcs]
5.Auxiliary plate supports [2 pcs]
6.Washers [4 pcs]
7.Screws [4 pcs]
8.Screws [4 pcs]
9.Shuttle race cover assy
10.Plain washers [2 pcs]
11.Wave washers [2 pcs]
12.Shoulder screws
[2 pcs]
13. | Face plate assy |
14. Screws [3 pcs] | |
15. | Bolts [2 pcs] |
16. | Eye guard assy |
17. Screws [2 pcs] | |
3445Q
Insert this part of the belt cover into the upper cover, install it with the two screws, and then tighten the upper cover screw.
3446Q
18. | Bed cover, R |
19. | Screws [4 pcs] |
20. | Bed cover, LR |
21. | Screw |
22. | Bolts [2 pcs] |
23. | Bed cover, LF |
24. | Screws [4 pcs] |
25. | Frame side cover |
26. | Screws [4 pcs] |
27. | Top cover |
28. | Plain washers [3 pcs] |
29. | Screws [3 pcs] |
30. | Belt cover |
31. | Screws [2 pcs] |
98 |