4. ASSEMBLY
Pneumatic specifications
When installing the solenoid box assembly, pass the tension release rod through the hole.
After installing the plunger pin, push the thread wiper connecting rod assembly up and check that the thread wiper unit moves smoothly.
3342Q
Adjust while referring to
1.Thread wiper arm assy
2.Set screw [Temporarily tighten]
3.Thread wiper connecting rod assy
4.Screws [2 pcs]
5.Solenoid box assy
6.Washers [2 pcs]
7.Bolts [2 pcs]
8.Plunger pin
9.Lifting lever
10.Screw with washer
60 |