4. ASSEMBLY
When assembling, apply grease to the required places while referring to
Secure link shaft A using the set screw so that link B (10) is centered in the bush.
1. Work clamp lifter |
|
[Insert from above the arm] |
|
2. Link shaft, B |
|
[Place into the forked section of the thread wiper driving lever (2)] | 3354Q |
3.Link shaft, A [Pass through the washer and link A (3)]
4.Snap pins [2 pcs: Attach to both ends of link shaft A]
5.Set screws [2 pcs]
6.Retaining ring
7.Plain washer
8.Rubber band
9.Work clamp lifting rod
10.Link shaft, C [Pass through link B (10) and the work clamp plate]
11.Snap pins [2 pcs: Attach to both ends of link shaft C]
12.Presser solenoid assy [Insert from above the arm]
13.Screws [2 pcs]
14.Screws [4 pcs]
15.Rubber caps [2 pcs]
67 |