5. ADJUSTMENT

５-２８. Work clamp interchangeability (KE-433B)

The KE-430B, 430C work clamp can also be used with the KE-433B.

Remove the screw (1), washer (2) and cover support stand (3), and then change the installation position for the work clamp arm assembly (4) from the standard installation position A to installation position B.

3503Q

５-２９. Work clamp interchangeability

(KE-434B, 434C, 435B, 435C, 436B, 436C, 484C)

2619Q The work clamp for the BAS-311F can be used. Replace the feed bar guide cover (1) with the feed bar guide cover assembly, LL (2) (optional).

Then, change the installation position for the presser arm assembly (3) from the standard installation position A to installation position B.

To alternate use between the normal work clamp and the BAS-311F work clamp

Use the optional work clamp 434EMK2 air (5) with the work clamp (4). It can then be used interchangeably with the BAS- 311F work clamp (6) at installation position B.

3504Q

131

KE-430B, 430C series