4. ASSEMBLY
Apply grease.
Apply grease.
1)Place the coupling spacer onto coupling hub 8.
2)Set coupling hub 8 on the pulse motor shaft at the angle for inserting the coupling spacer, and install the pulse motor to the machine bed.
*Make sure that the harness faces correctly.
3370Q
While pressing the set collar, |
|
tighten the set screw at the |
|
screw stop position. | Apply grease. |
|
Place the feed cam bracket onto the positioning pins, and then install with the screws.
3371Q
10.Ball bearing [Insert into the bed]
11.Coupling spacer
12.Pulse motor assy, X
13.PM bracket, X
14.Bolts [4 pcs]
15.Positioning pins [2 pcs]
16.
17.Screws [2 pcs]
18.Ball bearing
19.Coupling spacer
20.Pulse motor assy, Y
21.PM bracket, Y
22.Bolts [4 pcs: 3 pcs for
23.Set screw collar
24.Set screws [2 pcs]
73 |