4. ASSEMBLY
3386Q
20. Setting plate packing
21. Frame side cover
22. Blind plate
23. Screws [4 pcs]
24. Belt cover support pillars [2 pcs]
25. Synchronizer assy
26. Screws [2 pcs]
27. Timing pulley assy, U
28. Set screws [2 pcs]
3387Q
3382Q
Make a gap of 1.0 mm between the magnet of timing pulley assembly U and the synchronizer assembly, and then align the rear set screw in the rotation direction of timing pulley assembly U with the screw stop position and tighten the set screw at that position.
Rotation direction
3383Q
78 |