4. ASSEMBLY
Feed cams X and Y both have index marks. Check these when using.
3367Q
Assembly steps of the feed mechanism are the same for X and Y directions. Align the edges of coupling hub 8 and the cam shaft.
X direction
3368Q
Place the cam onto the cam shaft so that there is no play in the cam, and then tighten the set screws.
Y direction
3369Q
Place the coupling hub 8 onto the pulse motor shaft, and then tighten the set screw at the screw stop position so that the pulse motor shaft protrudes from the edge by 2.5 mm.
3362Q
1.Coupling hub, 8
2.Set screws [2 pcs]
3.PM bracket
4.Ball bearing [X: 2 pcs, Y: 1 pc]
5.Cam shaft
6.Feed cam
7.Set screws [2 pcs]
8.Coupling hub, 8
9.Set screws [2 pcs]
72 |