CAUTION

Sewing

This sewing machine should only be used by opera-

If using a work table which has casters, the casters

tors who have received the necessary training in safe

should be secured in such a way so that they cannot

use beforehand.

move.

The sewing machine should not be used for any

Attach all safety devices before using the sewing

applications other than sewing.

machine. If the machine is used without these

Be sure to wear protective goggles when using the

devices attached, injury may result.

 

machine.

Do not touch any of the moving parts or press any

If goggles are not worn, there is the danger that if a

objects against the machine while sewing, as this

needle breaks, parts of the broken needle may enter

may result in personal injury or damage to the

your eyes and injury may result.

machine.

Set the needle to the needle up stop position before

If an error occurs in machine operation, or if abnormal

turning off the power.

noises or smells are noticed, immediately turn off the

If this is not done, the wiper may strike the needle,

power switch. Then contact your nearest Brother

which might cause the needle to break.

dealer or a qualified technician.

Turn off the power switch at the following times,

If the machine develops a problem, contact your

otherwise the machine may operate if the foot switch

nearest Brother dealer or a qualified technician.

is depressed by mistake, which could result in injury.

 

When threading the needle

 

When replacing the needle and bobbin

 

When not using the machine and when leaving the

 

machine unattended

 

Cleaning

Set the needle to the needle up stop position before

Be sure to wear protective goggles and gloves when

turning off the power.

 

 

handling the lubricating oil and grease, so that they

If this is not done, the wiper may strike the needle,

do not get into your eyes or onto your skin, otherwise

which might cause the needle to break.

 

inflammation can result.

Turn off the

power switch

before

carrying out

Furthermore, do not drink the oil or eat the grease un-

der any circumstances, as they can cause vomiting

cleaning, otherwise the machine may operate if the

and diarrhoea.

foot switch is

depressed by

mistake,

which could

Keep the oil out of the reach of children.

result in injury.

 

 

 

 

 

 

 

Maintenance and inspection

 

Maintenance and inspection of the sewing machine

If the power switch and air need to be left on when

 

should only be carried out by a qualified technician.

carrying out some adjustment, be extremely careful to

 

Ask your Brother dealer or a qualified electrician to

observe all safety precautions.

 

 

 

carry out any maintenance and inspection of the

Hold the machine head with both hands when tilting it

 

electrical system.

back or returning it to its original position.

 

Set the needle to the needle up stop position before

Furthermore, after tilting back the machine head, do

 

turning off the power.

not push the face plate side or the pulley side from

 

If this is not done, the wiper may strike the needle,

above, as this could cause the machine head to

 

which might cause the needle to break.

topple over, which may result in personal injury or

 

Turn off the power switch and disconnect the power

damage to the machine.

 

Use only the proper replacement parts as specified

 

cord from the wall outlet at the following times,

 

otherwise the machine may operate if the foot switch

by Brother.

 

is depressed by mistake, which could result in injury.

If any safety devices have been removed, be abso-

 

When carrying out inspection, adjustment and main-

lutely sure to re-install them to their original positions

 

tenance

and check that they operate correctly before using

 

When replacing consumable parts such as the ro-

the machine.

 

tary hook

Any problems in machine operation which result from

 

Disconnect the air hoses from the air supply and wait

unauthorized modifications to the machine will not be

 

for the needle on the pressure gauge to drop to “0”

covered by the warranty.

 

before carrying out inspection, adjustment and repair

 

 

of any parts which use the pneumatic equipment.

 

 

 

iii

KE-430B, 430C series