4. ASSEMBLY

４-３. Thread wiper mechanism

Solenoid specifications

Tighten the set screw while lightly pressing the work clamp lever lifter shaft.

3341Q

Adjust the thread take-up spring height while referring to “1-2. Standard thread tension”.

After installing the thread wiper, moved the forked part of the thread wiper driving lever and check that the thread wiper unit moves smoothly.

Note:

If the thread wiper unit does not move smoothly, error E-60 may be displayed.

3339Q

Adjust while referring to “5-17. Adjusting the thread wiper”.

1.Thread wiper rod assy [Insert from above]

2.Thread wiper driving lever

3.Thread wiper shaft (with washer and retaining ring)

4.Set screw

5.Thread wiper rod assy

[Place onto the work clamp lever lifter shaft]

6.Retaining ring

7.Work clamp lever lifter shaft

8.Set screw

9.Tension release lever spring

10.Retaining ring

11.Thread wiper arm assy

12.Retaining ring

13.Set screw [Temporarily tighten]

14.Thread wiper

15.Plain washer

16.Screw

17.Tension release stud

18.Tension release pin

19.Thread tension assy

20.Set screw

59

KE-430B, 430C series