4. ASSEMBLY

４-５. Work clamp lifter mechanism (Solenoid specifications)

When assembling, apply grease to the required places while referring to “4-5-1. Applying grease”.

KE-430B, 431B, 433B, 434B

KE-430C, 431C, 434C

Secure link shaft, A using the set screw so that link, B (8) is centered in the bush.

<KE-433B, 434B, 434C>

3351Q

1.Work clamp lifter link-related parts [Insert from above the arm]

2.Link shaft, B [Place into the forked section of the thread wiper driving lever (2)]

3.Link shaft, A [Pass through the washer and link A (3)]

4.Snap pins [2 pcs: Attach to both ends of link shaft A]

5.Set screws [2 pcs]

6.Work clamp lifter stopper rubber

7.Work clamp plate [Insert from below the arm]

8.Link shaft, C [Pass through link B (8) and the work clamp plate]

9.Snap pins [2 pcs: Attach to both ends of link shaft C]

10.Presser solenoid assy [Insert from above the arm]

65

KE-430B, 430C series