Sending Fax Documents

Sending Fax DocumentsThis section describes the settings and procedures for sending fax documents.
Basic Methods for Sending Faxes

This section describes the flow of sending faxes.

1

Place documents.

2

Press

[SEND/FAX]/

[FAX].

The SEND/FAX indicator lights up and the

 

machine enters the send standby mode.

3

Press

[SEND/FAX] repeatedly to

select <FAX>, then press [OK].

 

F A X

S E L E C T : O K

For the D1150, skip this step.

4

Use – , [numeric keys] and

[Tone] to specify the fax number.

Ex.

F A X N U M B E R

T E L = 0 1 2 X X X X X X X

If you enter a wrong number when specifying a fax number, go back to the wrong digit with .

5

Press [Start].

 

 

– When you place the documents on the platen

 

glass, press

or

to select the document

 

size, then press

 

[Start] for each document.

When scanning is complete, press [OK] to start sending.

– You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 4.

• Density: See “Adjusting Density,” on p. 6-29.

• Image Quality: See “Selecting Image Quality,” on p. 6-30.

• 2-Sided: See “2-Sided Documents,” on p. 6- 31.

Calling the Recipient before Sending Fax Documents (ManualSending)

Use manual sending when you want to talk to the recipient before sending a document, or if the recipient does not have a fax machine that can receive automatically.

–You cannot use the platen glass for manual sending.

–You cannot use group addresses for manual sending.

–You cannot use 2-Sided scanning mode for manual sending.

(D1180/D1170/D1150) Fax

6-13