Specifying the Way of Printing When Toner Runs Out
Specifying the Way of Printing When Toner 
Runs Out
You can set if the machine stores all documents in memory or continue printing without storing documents in memory, when the toner runs out. The default setting is <RX TO MEMORY>.
–When the <TONER LOW/PREPARE NEW TONER> message appears, if you set <CONT. PRINTING> to <KEEP PRINTING>, you can continue printing. The printed documents may be light or blurred because of lack of toner. The data is erased when the documents are printed out, so you cannot print the same documents again.
–When the <TONER LOW/PREPARE NEW TONER> message appears, if you set <CONT. PRINTING> to <RX TO MEMORY>, the machine stores all documents in memory. After the toner cartridge is replaced, the documents can be printed and the setting can be reset.
1
2
3
4
Press 
[Menu].
Press 
or 
to select <TX/RX SETTINGS>, then press [OK].
M E N U
4 . T X / R X S E T T I N G S
Press 
or 
to select <TX/RX COMMON SET.>, then press [OK].
T X / R X S E T T I N G S
2 . T X / R X C O M M O N S E T .
Press 
or 
to select <RX SETTINGS>, then press [OK].
T X / R X | C O M M O N S E T . |
2 . R X | S E T T I N G S |
|
|
5 | Press | or | to select <CONT. | |
PRINTING>, then press [OK]. | ||||
|
|
| ||
|
| R X S E T T I N G S | ||
|
| 4 . C O N T . P R I N T I N G | ||
6 |
|
|
|
|
Press | or | to select <RX TO | ||
MEMORY> or <KEEP PRINTING>, then | ||||
press [OK].
C O N T . P R I N T I N G
R X T O M E M O R Y
–<RX TO MEMORY>: The machine stores all documents in memory.
–<KEEP PRINTING>: You can continue printing.
7 | Press [Stop/Reset] to return to the |
standby mode. |
(D1180/D1170/D1150) Fax