Copying

Multiple Documents onto One Sheet (2 on 1)

2

Press

[COPY].

3

Press

[Collate/2 on 1] repeatedly to

select <2 ON 1>, then press [OK].

2O N 1

–If you want to use <2 ON 1> and “Collating Copies” (see p. 3-19) at the same time, select <COLLATE+2 ON 1>, then press [OK].

–If you want to use <2 ON 1> and the 2-sided copying at the same time, go to step 3 of “1 to 2-Sided Copying” (see p. 3-25), “2 to 2-Sided Copying” (see p. 3-26), or “2 to 1-Sided Copying” (see p. 3-27).

4

Use

 

– [numeric keys] to enter the

desired copy quantity (1 to 99).

 

 

 

 

 

 

 

 

6 4 % *

L T R

0 1

5

 

 

 

T E X T / P H O T O

 

 

 

 

 

 

 

 

 

 

 

 

Press

 

[Start].

 

 

If you want to copy multiple documents using

the platen glass, place a document and press [Start] once for each page. When scanning is complete, press [OK].

–To cancel all settings, press [Stop/Reset].

–A maximum of 1/8" (4 mm) margin will be produced between the two reduced documents in 2 on 1 copying.

Copying ID Card

You can make copies of a card printed on both sides like an ID card. The printed images on the front- back both sides of a paper are placed on exactly the same position like the original card.

–You must place a document on the platen glass when using this function.

–The zoom ratio will automatically be set to <100%> with this feature. You cannot change the copy size.

–The ID card copy function can be used for LTR size paper if you select <INCHES> in <PAPER SIZE GROUP> in <COPY SETTINGS>, and for A4 if you select <A> or <AB>.

–When you select the ID card copy, the other copy settings you made, such as the copy ratio and paper size, will be canceled automatically.

–This function cannot be used with the 2 on 1 mode, the collating mode, or the 2-sided copying mode.

1

Place a card on the platen glass.

– Place a card as indicated below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–Align the center of a card with the arrow mark.

2

Press

[COPY].

3

Press

[Collate/2 on 1] repeatedly to

select <ID CARD COPY>, then press [OK].

 

I D

C A R D C O P Y

3-22