Starting the Remote UI

Starting the Remote UITo start the Remote UI, follow the procedure described below.

Before you start the Remote UI, perform the followings:

–Select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in <SYSTEM SETTINGS>, and verify the IP address of the machine. If you do not know the IP address, consult with your network administrator. (See “Confirming IP Address Settings,” in the e-Manual.)

–If the IP address is not displayed, check if the machine is correctly connected to the computer. For details, see “Set Up Network Connection,” in the e-Manual.

–Set <REMOTE UI> to <ON> in <SYSTEM SETTINGS>. (See “Restricting the Remote UI,” in the e-Manual.)

1

Prepare the Network.

Set up the machine for use in a network, then

connect the machine and the computer to your network router or a hub.

For details, see “Set UP Computers and Software,” in the Starter Guide.

3

Enter the IP address of the machine in

[Address] or [Location], then press [Enter]

on the keyboard.

Example: http://xxx.xxx.xxx.xxx/

For details on how to check the IP address, see “Confirming IP Address Settings,” in the e- Manual.

The Remote UI screen appears.

PC a from Settings

2

Start the web browser.

10-4