Basic Copying Method

Basic Copying MethodThis section describes the basic procedure for copying.

Copying

1

2

Place documents on the platen glass or load them in the ADF.

–For details, see “Placing Documents,” on p. 2-4.

–Close the ADF after placing your documents.

–For documents you can copy, see “Documents Requirements,” on p. 2-2.

Press [COPY].

–The COPY indicator lights up and the machine enters the copy standby mode.

–If you want to adjust the image quality, see “Selecting Image Quality,” on p. 3-12.

–If you want to adjust the density, see “Adjusting Density,” on p. 3-14.

–If you want to adjust the zoom ratio, see “Enlarge/Reduce Images,” on p. 3-16.

If you press and hold [OK] in the copy mode, a sample page will be printed. For details, see “Printing a Sample Page,” on p. 3-32.

3

Use –

[numeric keys] to enter the

desired copy quantity (1 to 99).

 

 

 

 

 

 

 

 

 

1 0 0 %

L T R

0 1

 

 

 

 

 

T E X T / P H O T O

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–The copy quantity appears on the right side of the display.

–If you make a mistake when entering values, press [Clear] and enter the correct values.

You cannot change the copy quantity while the machine is copying.

4 Press [Start].

You can make copy settings and scan documents even if the machine is currently printing. The scanned documents are processed after the current job is complete. You can reserve up to 5 copy jobs, with different settings for each job.

3-4