Display Messages

 

 

 

Message

Description

Action

START AGAIN

A transmission error has occurred because

Check the line condition, then try again.

 

the line condition was poor.

 

 

 

 

 

STOP KEY PRESSED

[Stop/Reset] has been pressed while

Press [OK], then set the document again.

PRESS OK KEY

 

 

scanning the document using the ADF.

 

 

 

 

 

SYSTEM ERROR

Some kind of error has occurred in the

Turn OFF the main power switch, wait for

 

machine.

more than 10 seconds, then turn it ON again.

 

 

If the message persists, turn OFF the main

 

 

power switch, disconnect the power cord,

 

 

and contact Canon Customer Care Center.

 

 

 

TONER COVER OPEN

A cover is open.

Check the cover, and make sure that it is

CLOSE COVER

 

completely closed.

 

 

 

TONER LOW

The toner is running low.

Prepare a new toner cartridge.

PREPARE NEW TONER

 

 

 

 

 

 

 

Troubleshooting

12-17