10 Specify the destination.

Ex.

F A X N U M B E R

T E L = 0 1 2 X X X X X X X

For details, see “Specifying Destinations,” on p. 6- 19.

If <CONFIRM FAX NO.> in <ACCESS TO DEST.> in <SYSTEM SETTINGS> is set to <ON> and you specify a fax number using – , [numeric keys] and [Tone], you must enter the fax number again for confirmation. Enter the same fax number you entered in step 10, then press [OK].

11

Press [Start].

 

The document is scanned and stored into

 

memory. It will be sent to the specified

 

destination at the specified time.

 

When you place the documents on the platen

 

glass, press

or

to select the document

 

size, then press

 

[Start] for each document.

When scanning is complete, press [OK] to start sending.

–When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if you have specified the destination by any other method than using

– , [numeric keys] and [Tone], the machine starts scanning automatically without

pressing [Start], after the preset time for this setting is elapsed. (See “Time Out Mode,” on p. 6-41.)

–If the document cannot be sent at the time specified for delayed sending due to a temporary power failure (that recovers within an hour), it will be sent at the specified time on the next day.

Sending Documents at a Preset Time (Delayed Sending)

(D1180/D1170/D1150) Fax

6-33