10

Press [Start].

If you want to copy multiple documents using

the platen glass, place a document and press [Start] once for each page.

Using the Multi-Purpose Tray with Envelopes

This section describes how to copy onto envelopes using the multi-purpose tray.

If <MP TRAY STD SET> is set to <OFF>, the display to specify the paper size and type for the multi-purpose tray appear every time you load paper on the multi-purpose tray. If <MP TRAY STD SET> is set to <ON>, copying can be performed only for the registered paper size and type. (See “Setting Paper Size and Type,” on p. 2-17.)

1

Place documents.

For details, see “Placing Documents,” on p. 2-4.

2

Press

[COPY].

3

Press

[Paper Select] repeatedly to

select the multi-purpose tray.

The paper select indicator of the selected paper source lights up. (See “Operation Panel,” on p. 1- 6.)

 

Selecting Paper Source

4

Load envelopes into the multi-purpose

tray.

–If <MP TRAY STD SET> is set to <OFF>, go to the next step.

–If <MP TRAY STD SET> is set to <ON>, skip to step 6.

5

Press

or

to select the paper size,

then press [OK].

 

 

 

 

 

 

S E L E C T P A P E R S I Z E

 

 

N O . 1 0 ( C O M 1 0 )

 

 

 

 

 

–To copy onto envelopes, select the paper size from the followings:

<NO.10 (COM10)>, <CAT. GLOVE NO.8>, <DL>, <ISO-C5>, or <ISO-B5>.

–If you select one of these size, <ENVELOPE> is automatically selected for the paper type.

–For details, see “Paper Requirements,” on p. 2-6 and “Printable Area,” on p. 2-8.

When <NO.10 (COM10)>, <CAT. GLOVE NO.8>, <DL>, or <ISO-C5> is set, the machine may perform printing even if a different size paper is loaded in the multi-purpose tray. Make sure the correct size paper is loaded before printing.

6

Press [Start].

If you want to copy multiple documents using

the platen glass, place a document and press [Start] once for each page.

Copying

3-11