1
2
3
4
5
Place documents.
Press [SEND/FAX]/ [FAX].
Press [SEND/FAX] repeatedly to select <FAX>, then press [OK].
F A X
S E L E C T : O K
For the D1150, skip this step.
Press [Coded Dial] .
I N P U T C O D E D N U M B E R
[ * | ] |
Use – [numeric keys] and to enter the desired
Ex.
T E L = 1 2 3 X X X X X X X [ * 0 0 0 ] J o h n
If you entered a wrong code, press [Stop/Reset], then try again from step 3.
|
|
| Specifying Destinations |
6 | Press [Start]. |
|
|
– When you place the documents on the platen | |||
| glass, press | or | to select the document |
| size, then press |
| [Start] for each document. |
When scanning is complete, press [OK] to start sending.
– You can also adjust the following scan settings as necessary, using the keys on the operation panel, after specifying the destination in step 5.
• Density: See “Adjusting Density,” on p.
• Image Quality: See “Selecting Image Quality,” on p.
•
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX SETTINGS> in <TX/RX SETTINGS>, and if you have specified the destination by any other method than using – , [numeric keys] and [Tone], the machine starts scanning automatically without pressing [Start], after the preset time for this setting is elapsed. (See “Time Out Mode,” on p.
Group Dialing enables you to specify a group of registered destinations in the
–To use this feature, you must store group addresses in the
–A maximum of 201 destinations can be specified at the same time. (Out of the 200 destinations, a number or address can be
specified with – , [numeric keys] and[Tone].) If you specify a group, which is made up of several destinations, each destination in the group is counted as a separate address.
(D1180/D1170/D1150) Fax