Copying

Selecting Paper Source

5

Press [Start].

If you want to copy multiple documents using

the platen glass, place a document and press [Start] once for each page.

–You can set the machine to automatically select the appropriate paper source based on the document’s size and copy ratio settings (Auto Paper Selection). You can also set the machine to automatically select another paper source with the same paper size if the current paper source runs out of paper while processing a job (Auto Cassette Switching). For details, see “Setting Auto Paper Selection/Auto Cassette Switching,” in the e-Manual.

–You can set the default paper source for copying (<AUTO>, <CASSETTE 1>, or <CASSETTE 2> (optional)) in <PAPER SELECT> in <STANDARD SETTINGS> in <COPY SETTINGS>.

Using the Multi-Purpose Tray with Standard Paper Sizes

This section describes how to copy onto standard size papers using the multi-purpose tray.

If <MP TRAY STD SET> is set to <OFF>, the display to specify the paper size and type for the multi-purpose tray appear every time you load paper on the multi-purpose tray. If <MP TRAY STD SET> is set to <ON>, copying can be performed only for the registered paper size and type. (See “Setting Paper Size and Type,” on p. 2-17.)

1

Place documents.

For details, see “Placing Documents,” on p. 2-4.

2

Press

[COPY].

3

Press

[Paper Select] repeatedly to

select the multi-purpose tray.

The paper select indicator of the selected paper source lights up. (See “Operation Panel,” on p. 1- 6.)

3-8