6
If you pressed [Hook] in step 2 and wish to talk to the other party, lift the handset.
5 Use the Numeric buttons to enter the numbers requested by the information service.
1
2
3
4 When the recorded message of the information service answers, press [Tone] ([ to switch to tone dialing.
When you have finished using the service, press [Hook] or hang up the handset.
Sending/Receiving Using ECM
This machine is set to send/receive faxes in ECM (Error Correction Mode). ECM automatically corrects errors caused by connection troubles, cross-checking the sending and receiving conditions at the sending and receiving ends.
Note
z If the sender's or receiver’s fax is not ECM-compatible, the fax will be sent/received in the standard mode.
z You can disable ECM sending/receiving. See “ECM TX” on page 138 and “ECM RX” on page 139.
])
Use the Numeric buttons to dial the number of the information service.
Press [Hook] or lift the handset.
Press [FAX].
Special Dialing
Dialing through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is connected through a PBX or other telephone switching systems, you have to dial the outside line access number first, and then the number of the party you are calling.
Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc. require tone dialing for their services. If your machine is connected to a rotary pulse line, you can set the machine to temporarily switch to tone dialing.
z
z
z
Chapter 5 | Faxing | 117 |