„Power save setting

Specifies the time until Power saving is enabled.

You can select from <5 minutes>, <15 minutes>, <1 hour> or <8 hours>. The initial value is set to <1 hour>.

„Country select

Selects the country where you are using your machine.

Note

This setting may not be available depending on the country of purchase.

„Adjust contrast

Use this to adjust the contrast of the LCD if it is too low or too high.

„Slide show setting

Specifies the image display quality of the slide show.

Note

When <Image quality: Std> is selected, images are displayed at 5-second intervals. When

<Image quality: High> is selected, images are displayed at different time intervals according to their resolutions.

Language selection

Changes the language for LCD messages.

Reset setting

Reverts all settings you made to the machine since purchase back to default. However, some data may not be erased, depending on the current usage state of your machine.

Save settings

Saves the settings for the Settings screen.

Load settings

Loads the settings for the Settings screen that were saved.

Chapter 9

Changing the Machine Settings

141