2
3
Use [Feed Switch] to select the paper source where you have loaded paper.
Printing the nozzle check pattern.
(1)Display the Maintenance screen.
See “Performing Maintenance” on page 149.
(2)Use [
] or [
] to select <Nozzle check> and then press [OK]. The pattern print confirmation screen is displayed.
(2)
(3)Use [
] or [
] to select <Yes> and then press [OK]. The nozzle check pattern is printed.
(3)
4Examine the pattern and take the appropriate action.
See “Examining the Nozzle Check Pattern” on page 150.
Examining the Nozzle Check Pattern
Examine the nozzle check pattern. Perform cleaning if necessary.
Note
If the ink level is low, the nozzle check pattern is not printed correctly. Replace the relevant ink tank. (See “Replacing an Ink Tank” on page 142.)
(1)
(2)
(1) Examine if any missing lines exist on this pattern.
150 | Routine Maintenance | Chapter 10 |