Note

zTo cancel copying, press [Stop/Reset].

zThe machine can also receive faxes in copy mode (when [COPY] is pressed).

„Reducing or Enlarging a Copy

You can reduce or enlarge copies.

1Prepare for copying.

See “Prepare for copying.” on page 42.

2Select the reduction/enlargement method.

The example below assumes that you will select <Zoom (25-400%)>.

(1)Press [Settings].

(2)Use [] or [] to select Tab 1.

(3)Use [] or [] to select <Magnification>, and use [ ] or [ ] to select <Zoom (25- 400%)>.

Specify the custom copy ratio for reducing or enlarging copies.

(3)

Besides <Zoom (25-400%)>, you can also choose from the following reduction/ enlargement methods.

Same magnification: Copies in the same size as an original.

Preset ratio:

Preset ratios are convenient when changing between standard page sizes,

 

for example, when reducing A4 to A5, or enlarging B5 to A4.

Fit-to-page:

You can automatically reduce or enlarge the document to fit the size of the

 

paper which are loaded in the Auto Sheet Feeder or Cassette.

Note

When loading the document on the ADF, you cannot select <Fit-to-page>.

(4)Press [] to move the cursor down, and use [] or [] to select the setting value. Holding down [] or [] steps through the values faster.

Note

When you choose <Fit-to-page>, the document size may not be detected correctly depending on the document. In that case, choose <Same magnification>, <Preset ratio> or <Zoom (25- 400%)>.

3Finalize your selection.

(1)Press [Settings].

Return to the Copy standby screen.

4Start copying.

See “Start copying.” on page 42.

Chapter 2

Copying

43