5Prepare the Paper Output Tray.
(1)Press the Open Button to open the Paper Output Tray.
(2)Open the Paper Output Tray Extension completely.
(3)Press [Feed Switch] so that the Cassette Lamp (A) lights.
(3)
(A)
(1) (2)
Note
You can also select the paper source with the printer driver. For details, refer to the Printer Driver Guide.
zLoading Envelopes
Use either European DL or US Comm. Env. #10 size envelopes.
Important
zEnvelopes can be used only when printing from a computer.
zDo not use envelopes with embossed or treated surfaces, a double flap, pressure seals or sticker flaps.
zSelect either [DL Env.] or [Comm. Env. #10] according to the envelope size you are using.
zThe printed image will be upside down depending on the application. If this occurs, open the printer properties dialog box then select the [Rotate 180 degrees] check box on the [Page Setup] tab.
For information on the printer driver settings, refer to the Printer Driver Guide.
1 Align the envelope stack against the right side of the Cassette with the print side facing DOWN, and the rear flaps UP on the left side.
Note
A maximum of 5 envelopes can be loaded at once.
34 | Before Printing | Chapter 1 |