zIncoming ring
Sets whether to ring with an incoming call when the receive mode is set to <FAX only> or <FAX/ TEL auto switch>. A telephone needs to be connected for the machine to ring.
Ring count | Specifies the number of times the machine rings when <ON> |
| is selected. |
zManual/auto switch
Sets, when the receive mode is set to <Manual RX> or <Ans. machine connect.>, whether to automatically receive faxes after the machine rang a specified length of time.
RX start time | Specifies the length of time until automatic reception is started |
| when <ON> is selected. |
zRemote RX
Enables/disables remote reception.
Remote RX ID | Specifies the remote reception ID when <ON> is selected. |
zRX image reduction
Enables/disables automatic reduction of incoming faxes so that they fit in the selected paper.
Image reduction direction Selects the image reduction direction when <ON> is selected.
zRX start speed
Selects the fax reception speed.
zRX report
Sets whether to print a reception report after each reception.
Other Settings
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
If you set this setting to <Read/write mode>, card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to revert this setting to <Read- only mode>.
Volume control
Selects the volume.
zKeypad volume
Selects the beep volume when pressing the buttons on the Operation Panel.
zAlarm volume
Selects the alarm volume.
140 | Changing the Machine Settings | Chapter 9 |