3Select the binding margin.

(1)Use [] or [] to select the binding margin, then press [OK].

4Load the document.

(1)Follow the on-screen instructions to load the document, then press [OK].

5Specify the necessary items.

See “To Change Print Settings” on page 37.

6Start copying.

(1)Press [Color] for color copying, or [Black] for black & white copying.

zWhen the document was loaded on the Platen Glass:

(2)Load the document to be printed on the back face on the Platen Glass. If you have only one document to scan, press [OK].

(3)Press [Color] or [Black]. Be sure to press the same button as you pressed in step (1).

Important

If you do not press the same button in step (1) and step (3), the machine does not start copying.

zWhen the document was loaded in the ADF:

The machine starts copying automatically after the document is scanned in.

Note

zThis function cannot be used in conjunction with <Fit-to-page> under <Magnification> or other copy functions.

zIf you perform black & white copying for <Two-sided copy>, print intensity may be different from when performing black & white copying for single-sided copy.

zThis function can only be used when the page size is set to <8.5" x 11"> or <A4>. Two-sided to two-sided copying and two-sided to single-sided copying can only be performed for A4- or Letter- sized originals.

zThe media type is fixed to <Plain paper>. You cannot change this setting.

zWhen the document is set to the ADF, the document pages are not ejected in the original order under the machine's default setting. If you want the document pages to eject in the original order, set <Two-sided output setting> to <Output by page>. See “Two-sided output setting” on page 136.

Chapter 2

Copying

45