zAuto redial
Enables/disables automatic redialing.
Redial times | Specifies the maximum number of redial attempts. |
Redial interval | Specifies the length of time the machine waits between redial |
| attempts. |
z TX start speed Selects the fax sending speed.
zColor TX
When faxing color documents using the ADF, selects whether to perform automatic black & white conversion if the recipient’s fax machine does not support color faxing.
zTX report
Sets whether to print a transmission report after each transmission.
Attach TX image | When <Print error only> or <Print for each TX> is selected, |
| sets whether to print the first page of the document below the |
| transmission report |
zDial tone detect
Sets whether to send faxes after detecting the dial tone. Select <ON> to enable this feature and avoid transmission errors caused when a fax transmission coincides with reception of an incoming call.
RX settings
zECM RX
Enables/disables ECM reception.
zFAX/TEL auto switch
Specifies the detailed settings when the receive mode is set to <FAX/TEL auto switch>.
Ring start time | Specifies the length of time to allow the machine to judge |
| whether an incoming call is fax or a voice call. |
Telephone ring time | Specifies, in seconds, the time the machine rings for a voice |
| call. |
Default action | Sets whether to receive the fax after the specified ring time |
| has elapsed. |
zDRPD: Set FAX ring pat.
Sets the distinctive ring pattern the machine gives off when you receive a fax call. If you subscribe to a DRPD service, set this to match the pattern assigned by your telephone company. This setting is only available in US and Canada.
Chapter 9 | Changing the Machine Settings | 139 |