zEntering the Date And Time
Note
When your machine is connected to a computer with the MP Drivers installed, the date and time will be read from your computer every time you start the computer, turn the machine on, or connect the USB cable.
The date and time will be reset when you disconnect the power cord or there is a power failure. In this case, you can set it again on the machine. Alternatively, it can be read from your computer and set on the machine by connecting the machine to your computer with the MP driver installed.
1Display the FAX menu.
See “Display the FAX menu.” on page 81.
2Display the Device settings screen.
See “Display the Device settings screen.” on page 81.
3Display the User settings screen.
See “Display the User settings screen.” on page 81.
4
5
Display the Date/time setting screen.
Use [
] or [
] to select <Date/time setting>, then press [OK].
(1)
Enter the date and time.
(1)Use the Numeric buttons to enter the date and time (in
Note
zIf you misentered the date and time, use [ 
] or [ 
] to move the cursor under the number to enter the correct number.
zThree formats of date are available. For details on the date format settings, see “Date display” on page 138.
84 | Faxing | Chapter 5 |