1-6
Install, Upgrade, and Maintenance Guide for Cisco Unity Connection Release 10.x
Chapter1 Installing CiscoUnity Connection
Pre-Installation Tasks
Table1-2 Gathering Information for Installation
Configuration Setting Description Can Setting Be Changed After Installation?
Time Zone: _____________________ Sets the local time zone and offset
from Greenwich Mean Time (GMT).
Select the time zone that most closely
matches the location of your server.
Caution In a cluster, you must set
the subscriber server to the
same time zone as the
publisher server.
Yes, using the CLI command
CLI > set timezone
MTU Size: ______________________ Sets the largest packet, in bytes, that
this host will transmit on the network.
By default, MTU is set to the size
defined in the operating system.
Selecting a different packet size
would be more prevalent where a
VPN or IPsec tunnel is used with a
custom packet size. Web access over
VPN can cause web pages not to load
because of an improper MTU
configuration.
The MTU size that you configure
must not exceed the lowest MTU size
that is configured on any link in your
network.
Note In clustered server pairs, the
MTU setting must be the
same on both servers.
Yes, using the CLI command
CLI > set network mtu