Cisco Systems manual WAE-611 Back Panel with Scsi Port Connector

Chapter 1 Introducing the Cisco Wide Area Application Engine

Introduction

Figure 1-2 WAE-611 Back Panel with SCSI Port Connector

SCSI port connector

124684

WAE-511 and 611 models can be configured with either a Fibre Channel adapter or an MPEG A/V decoder adapter. These adapters are user-replaceable and are installed in PCI-X slot 1 on the back panel.

Figure 1-3shows the WAE-511 and WAE-611 back panel with a Fibre Channel adapter installed in slot PCI 1, and Figure 1-4shows the WAE back panel with an MPEG A/V decoder adapter installed in slot PCI 1.

Figure 1-3 WAE-511 and WAE-611 Back Panel with Fibre Channel Adapter

124656

Figure 1-4 WAE-511 and WAE-611 Back Panel with MPEG A/V Decoder Adapter

115771

	Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02		1-3