Cisco Systems manual WAE-511 and WAE-611 Back Panel Ports and Receptacles

Chapter 1 Introducing the Cisco Wide Area Application Engine

Hardware Features

Figure 1-9		WAE-511 and WAE-611 Back Panel Ports and Receptacles
	1	2	3		4
						115773
			8	7	5
					6
1	AC power receptacle				2	Mouse port
3	Keyboard port				4	Ethernet 1 receptacle
5	Ethernet 2 receptacle				6	USB ports (not supported)
7	Monitor port				8	Serial port

Note Cisco ACNS and WAFS software do not support the use of a keyboard or mouse (Personal System 2 [PS/2] or Universal Serial Bus [USB]). However, keyboard and mouse are supported by the BIOS for power-on self-test (POST), and the configuration/setup utility.

Table 1-5describes the back panel ports and receptacles.

Table 1-5 Back Panel Ports and Connectors

	Item	Description
	AC power receptacle	The AC power cord connects to this plug.
	Ethernet 1 port	This 10/100/1000BASE-T port is autosensing with
		full-duplex capability; it connects your device to the
		Ethernet LAN.
	Ethernet 2 port	This 10/100/1000BASE-T port is autosensing with
		full-duplex capability; it connects your device to the
		Ethernet LAN.
	Serial port	This is a standard serial port for connecting to a
		console or terminal.
	Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02			1-11