Appendix D Using the Configuration/Setup Utility Program
Configuration/Setup Utility Menu Options
System Security
Choose this option to set passwords. This option is on the full
Configuration/Setup Utility menu only.
Advanced Setup
Choose this option to change settings for advanced hardware features.
Caution The device might malfunction if these options are incorrectly configured. Follow the instructions in the window carefully.
This option is on the full Configuration/Setup Utility menu only.
Power Management
Choose this option to enable or disable the automatic
Error Log
Choose this option to view the three most recent error codes and messages that the system generated during POST. You can use the arrow keys to move between pages in the error log. Choose Clear error logs to clear the POST error log.
Save Settings
Choose this option to save the changes you have made in the settings.
Restore Settings
Choose this option to cancel the changes you have made in the settings and restore the previous settings.
Load Default Settings
Choose this option to cancel the changes you have made in the settings and restore the factory settings.
Exit Setup
Choose this option to exit from the Configuration/Setup Utility program. If you have not saved the changes you have made in the settings, you are asked whether you want to save the changes or exit without saving them.
| Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide |
|
