Cisco Systems 611 manual Serial Port Connector

Chapter 1 Introducing the Cisco Wide Area Application Engine

Hardware Features

Figure 1-10

Activity LED

(green)

Ethernet Port Connector

Link LED

(green)

83195

81

Serial Port Connector

The WAE appliance has one standard serial port connector located on the back of the device.

Figure 1-11shows the pin number assignments for the 9-pin, male D-shell serial port connector on the back of the device. These pin number assignments conform to the industry standard.

Figure 1-11 Serial Port Connector

15

83193

69

SCSI Port Connector

The WAE-611 has one SCSI LVD port connector located on the back of the device. A cable for this port is provided when you purchase a Cisco Storage Array.

When you attach an external SCSI device to the SCSI connector, you must set a unique ID for the device. Refer to the information that comes with the device for instructions on how to set its SCSI ID.

	Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02		1-13